• Laser Marking and Etching

Laser Marking

Branding or marking in the form of logos, serial numbers, product codes or user instructions and warnings.

Many manufactured and imported components need branding or marking in the form of logos, serial numbers, product codes or user instructions and warnings. EU compliant components need CE marking and many components need traceability. Using a laser to mark this information gives a permanent, aesthetic and non-damaging solution. Parts can be directly laser marked and this can be useful where labels must be avoided.

The precise, repeatable nature of lasers allow the fine detail marking required on smaller components and the accurate removal of coatings. 

The laser beam width can be focused to less than 30 microns and it can be repeatably positioned to the same magnitude.

Materials which can be marked include metals (Stainless steel, aluminum, gold, silver, titanium, bronze, platinum, copper), plastics (ABS, polycarbonate, polyamide, PMMA), composite materials (fiberglass and other advanced composite and laminated materials) and organic materials (wood, stone, glass).